Double puncture to take electricity ,double fixing clips to fix cables, stable and reliable voltage signal collection; open and close structure, easy to install on site and easy to operate. Quick and easy installation or removal without disconnecting the primary cable under test ,effective for safe and easy current testing ;

All manual operation parts are insulators, which can be operated live and can be branched at any position of the cable .

The appearance is double splicing color and the installation direction and phase difference can be judged by color (A-phase –yellow ,B phase –green, C phase –red )

The shell adopts ultrasonic fusion welding integrated molding process, and the magnetic core winding structure is cast with epoxy resin and the waterproof level can be IP66.

Adopt high magnetic ，good linearity and high sensitivity.

Application

Electrical fire monitoring system ,fire equipment power monitoring system ,intelligent power consumption system, intelligent low-voltage power grid, small current grounding system, relay protection ,motor protection system, etc. For current measurement, monitoring and protection of lines and equipment.

Electrical performance parameters	Operation temperature	-40℃～+70℃	Relative humidity	≤90%
	Voltage level	0.4/0.66/0.72KV	Linear range	5%～120%
	Rated input current	50～600A	Rated output current	1A
	Rated capacity	1VA-2VA	Rated frequency	50/60Hz
	Accuracy class	0.5级	Dielectric strength	1000MΩ/500V/min
Mechanical structure parameters	Shell and skeleton	PA/PCFlammability rating94-V0	Output method	Flexible PVC sheathed wire
	Current output	Yellow line –brown line	Power output	Red line
	Core material	Silicon Steel	Opening and closing structure	“304”Fastening with inseparable screw
	Puncture needle	Stainless steel“304”	Construction plan	Fixing knob to lock the cable
	caliber	36mm×46mm	Adapter cable diameter	25mm²～240mm²

Dimensions

Output lead description:

1. The input end is a cable through the core (P1 → P2);

2. The output end is led out by a three core sheathed wire;

3. The red wire core is the voltage measurement terminal (led out by two puncture needles);

4. Yellow and brown lines represent secondary current signal output;

5. Define the polarity correspondence between "P1" and the yellow line as the Siming end (*)

When the transformer is powered on ,you must wear insulating gloves and your hands must not directly touch the red core of the shielded wire;

Before the silicon steel core is closed ,ensure that the end face of the incision is clean ,free of stains and impurities; It must be treated with anti-rust agent;

D Series Split-core Type CT for Outdoor Waterproof Double Puncture&Power Harvester

Telephone

Email

Quick Links

Product Category

Subscribe to our newsletter

Availability:



Inquire Add to Basket