High precision current sensors for measurement TRJC400-26A

Home » Products » Current Sensor » High-Precision Current Transducer » High precision current sensors for measurement TRJC400-26A

Share to:

High precision current sensors for measurement TRJC400-26A

This product utilizes the basic magnetic principle combined with multi-channel feedback compensation technology to operate the sensor in a zero magnetic flux state, with extremely high measurement accuracy. Due to the insensitivity of the magnetic flux of the sensor core to temperature, the sensor made using the zero magnetic flux principle not only measures AC and DC simultaneously, but also has the characteristics of being less affected by environmental temperature, high measurement accuracy, wide measurement frequency band, and good stability.

Availability:



Inquire Add to Basket

Model:
TRJC400-26A
Brand:
TR

Technology Characteristics

◇ Multichannel magnetic compensation feedback

◇ Tiny misaligned currents

◇ Superior linearity

◇ High isolation withstand

◇ Small error between input & output

◇ Wide Frequency bandwidth

◇ Fast response speed

◇ High-resolution

◇ Low temperature drift

Application

◇ New energy detection

◇ Substitute hall products

◇ Power electronic measurement

◇ Industrial control and measurement

◇ Medical facility

◇ Standard for laboratory testing

◇ Rail traffic

◇ instruments and apparatus

Certificate

◇RoHS/REACH compliant

◇CE certificate

◇UL flame retardant rating 94-V0( For the housing)

50a current sensor current sensor ic split core current sensors flexible current sensor 4-20ma hall effect current sensor wireless current sensor 10ac 10a current sensor open loop current sensor current sensor 100a split coil ac current sensor 50a

Type	Symbol	Test condition	Min	Rated	Max	Unit
Measuring range	I_PM		--	±400	±480	Adc
Power supply	V_c	Full range	±14.5	±15	±15.5	Vdc
Current consumption	I_c	Within the IPM range	±40	±240	±280	mA
Ratio	K_N	Input：Output	2000:1			--
Rated output current	I_SN	Primary rated current	--	±200	--	mA
Measuring resistance	R_M	Refer to Pic.1	--	5	12	Ω
Precision	X_e	25±10℃	--	--	0.02	%
Linearity	ε_L	--	--	--	20	ppm
Temperature drift coefficient	TCI_OUT	--	--	--	0.1	ppm/K
Zero offset current	I_o	25±10℃	--	--	±5	uA
Zero offset current	I_oT	Full operating temperature range	--	--	±10	uA
Ripple current	I_n	DC-10Hz	--	--	2	uA
Dynamic response time	t_r	5% up to 90%IPN	--	--	1	us
di/dt accurately followed	di/dt	--	200	--	--	A/us
Frequency bandwidth(- 3 dB)	F	--	0	--	100	kHz

Type	Symbol	Test condition	Min	Nominal	Max	Unit
Operating temperature range	TA	--	-40	--	+85	℃
Storage temperature range	TS	--	-55	--	+100	℃
Output status indication signal	--	When the output status indicator light (green LED) is on, it means that the product works normally, and the input current of the busbar does not exceed its bearing capacity; When the output status indicator light is off, it indicates that the product is not working properly or the input current value of the busbar is beyond its capacity.

Type		Symbol	Test condition	Min	Nominal	Max	Unit
Isolated voltage withstand	Between the primary and secondary	Vd	50Hz,1min	--	2.5	--	KV
Transient isolation withstand voltage	Between the primary and secondary	Vw	50us	--	5	--	KV

Type	Symbol	Test condition	Min	Rated	Max	Unit
Measuring range	I_PM		--	±400	±480	Adc
Power supply	V_c	Full range	±14.5	±15	±15.5	Vdc
Current consumption	I_c	Within the IPM range	±40	±240	±280	mA
Ratio	K_N	Input：Output	2000:1			--
Rated output current	I_SN	Primary rated current	--	±200	--	mA
Measuring resistance	R_M	Refer to Pic.1	--	5	12	Ω
Precision	X_e	25±10℃	--	--	0.02	%
Linearity	ε_L	--	--	--	20	ppm
Temperature drift coefficient	TCI_OUT	--	--	--	0.1	ppm/K
Zero offset current	I_o	25±10℃	--	--	±5	uA
Zero offset current	I_oT	Full operating temperature range	--	--	±10	uA
Ripple current	I_n	DC-10Hz	--	--	2	uA
Dynamic response time	t_r	5% up to 90%IPN	--	--	1	us
di/dt accurately followed	di/dt	--	200	--	--	A/us
Frequency bandwidth(- 3 dB)	F	--	0	--	100	kHz

Type	Symbol	Test condition	Min	Nominal	Max	Unit
Operating temperature range	TA	--	-40	--	+85	℃
Storage temperature range	TS	--	-55	--	+100	℃
Output status indication signal	--	When the output status indicator light (green LED) is on, it means that the product works normally, and the input current of the busbar does not exceed its bearing capacity; When the output status indicator light is off, it indicates that the product is not working properly or the input current value of the busbar is beyond its capacity.

High precision current sensors for measurement TRJC400-26A

Technology Characteristics

Application

Certificate

Technology Characteristics

Application

Certificate

Electrical performance

General characteristic

Security feature

Electrical performance

General characteristic

Security feature

Telephone

Email

Quick Links

Product Category

Subscribe to our newsletter