High-precision AC and DC Hall current sensors
Main Characteristics
* Measures AC, DC and pulsed signals
* Excellent accuracy, good linearity
* Strong resistance to external interference, high common mode rejection ratio
* Low temperature drift, low power consumption, wide frequency band
* Split structure, easy to install
Application
* AC frequency conversion speed regulation
* Servo motor traction
* Uninterruptible power supply(UPS)
* Welding machine, battery power supply
Specification
Specification | 50A/4V | 200A/4V | 500A/4V | Unit | |
I PN | Primary Rated Input Current | 50 | 200 | 500 | A |
IP | Primary Current Measurement Range | 0～100 | 0～400 | 0～1000 | A |
VSN | Secondary rated output voltage | 4 | V | ||
VC | The Power Supply Voltage | ±12～15(±5%) | V | ||
IC | Current Consumption | ＜25 | mA | ||
Vd | Insulation Voltage | Between primary and secondary circuits:2.5kV/50Hz/1min | |||
ε L | Linearity | ＜1 | %FS | ||
X | Precision | TA =25℃:≤±1 | % | ||
V0 | Offset Voltage | TA =25℃:≤±20 | mV | ||
VOM | Magnetic Offset Voltage | IP=0 after 3*ITPN:≤±20 | mV | ||
VOT | Offset Voltage Temperature Drift | IP =0 TA =-40～+80℃:≤±1 | mV/℃ | ||
Tr | Response Time | ≤5 | μS | ||
f | Bandwidth(-3dB ) | DC～20 | KHz | ||
TA | Working Temperature | -40～+80 | ℃ | ||
TS | Storage Temperature | -45～+85 | ℃ | ||
RL | Load Resistance | TA =25℃:≥10 | kΩ | ||
Structure and Dimension
Circuit link diagram
Note:
IPN:Primary current input direction
+ :Positive 12V/15V power supply
- :Negative 12V/15V power supply M :Secondary signal output
G :Power ground OFS:Zero adjustment GIN:Amplitude adjustment
Installation Precautions
* The sensor should be wired correctly, otherwise it may damage the internal components of the sensor
* Dynamic performance (di/dt and response time) is best when the input current row is fully filled with the primary perforation